# Bit Extraction

Some applications require directly manipulating bits of integers. Concrete provides a bit extraction operation for such applications.

Bit extraction is capable of extracting a slice of bits from an integer. Index 0 corresponds to the lowest significant bit. The cost of this operation is proportional to the highest significant bit index.

Bit extraction only works in the `Native`

encoding, which is usually selected when all table lookups in the circuit are less than or equal to 8 bits.

Slices can be used for indexing `fhe.bits(value)`

as well.

Even slices with negative steps are supported!

Signed integers are supported as well.

Lastly, here is a practical use case of bit extraction.

prints

## Limitations

Bits cannot be extracted using a negative index.

Which means

`fhe.bits(x)[-1]`

or`fhe.bits(x)[-4:-1]`

is not supported for example.The reason for this is that we don't know in advance (i.e., before inputset evaluation) how many bits

`x`

has.For example, let's say you have

`x == 10 == 0b_000...0001010`

, and you want to do`fhe.bits(x)[-1]`

. If the value is 4-bits (i.e.,`0b_1010`

), the result needs to be`1`

, but if it's 6-bits (i.e.,`0b_001010`

), the result needs to be`0`

. Since we don't know the bit-width of`x`

before inputset evaluation, we cannot calculate`fhe.bits(x)[-1]`

.

When extracting bits using slices in reverse order (i.e., step < 0), the start bit

**needs**to be provided explicitly.Which means

`fhe.bits(x)[::-1]`

or`fhe.bits(x)[:2:-1]`

is not supported for example.The reason is the same as above.

When extracting bits of signed values using slices, the stop bit

**needs**to be provided explicitly.Which means

`fhe.bits(x)[1:]`

or`fhe.bits(x)[1::2]`

is not supported for example.The reason is similar to above.

To explain a bit more, signed integers use two's complement representation. In this representation, negative values have their most significant bits set to 1 (e.g.,

`-1 == 0b_11111`

,`-2 == 0b_11110`

,`-3 == 0b_11101`

). Extracting bits always returns a positive value (e.g.,`fhe.bits(-1)[1:3] == 0b_11 == 3`

) This means if you were to do`fhe.bits(x)[1:]`

where`x == -1`

, if`x`

is 4 bits, the result would be`0b_111 == 7`

, but if`x`

is 5 bits the result would be`0b_1111 == 15`

. Since we don't know the bit-width of`x`

before inputset evaluation, we cannot calculate`fhe.bits(x)[1:]`

.

Bits of floats cannot be extracted.

Floats are partially supported but extracting their bits is not supported at all.

## Performance Considerations

### A Chain of Individual Bit Extractions

**Key Concept**: Extracting a specific bit requires clearing all the preceding lower bits. This involves extracting these previous bits as intermediate values and then subtracting them from the input.

**Implications:**

Bits are extracted sequentially, starting from the least significant bit to the more significant ones. The cost is proportional to the index of the highest extracted bit plus one.

No parallelization is possible. The computation time is proportional to the cost, independent of the number of CPUs.

**Examples:**

Extracting

`fhe.bits(x)[4]`

is approximately five times costlier than extracting`fhe.bits(x)[0]`

.Extracting

`fhe.bits(x)[4]`

takes around five times more wall clock time than`fhe.bits(x)[0]`

.The cost of extracting

`fhe.bits(x)[0:5]`

is almost the same as that of`fhe.bits(x)[5]`

.

### Reuse of Intermediate Extracted Bits

**Key Concept**: Common sub-expression elimination is applied to intermediate extracted bits.

**Implications:**

The overall cost for a series of

`fhe.bits(x)[m:n]`

calls on the same input`x`

is almost equivalent to the cost of the single most computationally expensive extraction in the series, i.e.`fhe.bits(x)[n]`

.The order of extraction in that series does not affect the overall cost.

**Example**:

The combined operation `fhe.bit(x)[3] + fhe.bit(x)[2] + fhe.bit(x)[1]`

has almost the same cost as `fhe.bits(x)[3]`

.

### TLUs of 1b input precision

Each extracted bit incurs a cost of approximately one TLU of 1-bit input precision. Therefore, `fhe.bits(x)[0]`

is generally faster than any other TLU operation.

Last updated