# Examples

This section includes a complete example of a neural network in Torch, as well as links to additional examples.

## Post-training quantization

In this example, we will train a fully-connected neural network on a synthetic 2D dataset with a checkerboard grid pattern of 100 x 100 points. The data is split into 9500 training and 500 test samples.

This network was trained using different numbers neurons in the hidden layers, and quantized using 3-bits weights and activations. The mean accumulator size shown below was extracted using the Virtual Library.

neurons | 10 | 30 | 100 |
---|---|---|---|

fp32 accuracy | 68.70% | 83.32% | 88.06% |

3bit accuracy | 56.44% | 55.54% | 56.50% |

mean accumulator size | 6.6 | 6.9 | 7.4 |

This shows that the fp32 accuracy and accumulator size increases with the number of hidden neurons, while the 3-bit accuracy remains low irrespective of to the number of neurons. While all the configurations tried here were FHE compatible (accumulator < 8 bits), it is sometimes preferable to have lower accumulator size in order for the inference time to be faster.

The accumulator size is determined by **Concrete Numpy** as being the maximum bitwidth encountered anywhere in the encrypted circuit

### Pruning using Torch

Considering that FHE only works with limited integer precision, there is a risk of overflowing in the accumulator, resulting in unpredictable results.

To understand how to overcome this limitation, consider a scenario where 2 bits are used for weights and layer inputs/outputs. The `Linear`

layer computes a dot product between weights and inputs $y = \sum_i w_i x_i$. With 2 bits, no overflow can occur during the computation of the `Linear`

layer as long the number of neurons does not exceed 14, i.e. the sum of 14 products of 2-bit numbers does not exceed 7 bits.

By default, Concrete-ML uses symmetric quantization for model weights, with values in the interval $\left[-2^{n_{bits}-1}, 2^{n_{bits}-1}-1\right]$. For example, for $n_{bits}=2$ the possible values are $[-2, -1, 0, 1]$, for $n_{bits}=3$ the values can be $[-4,-3,-2,-1,0,1,2,3]$.

However, in a typical setting, the weights will not all have the maximum or minimum value (e.g. $-2^{n_{bits}-1}$). Instead, weights typically have a normal distribution around 0, which is one of the motivating factors for their symmetric quantization. A symmetric distribution and many zero-valued weights are desirable because opposite sign weights can cancel each other out and zero weights do not increase the accumulator size.

This can be leveraged to train network with more neurons, while not overflowing the accumulator, using a technique called pruning, where the developer can impose a number of zero-valued weights. Torch provides support for pruning out of the box.

The following code shows how to use pruning in our previous example:

Results with `PrunedSimpleNet`

, a pruned version of the `SimpleNet`

with 100 neurons on the hidden layers are given below:

non-zero neurons | 10 | 30 |
---|---|---|

fp32 accuracy | 82.50% | 88.06% |

3bit accuracy | 57.74% | 57.82% |

mean accumulator size | 6.6 | 6.8 |

This shows that the fp32 accuracy has been improved while maintaining constant mean accumulator size.

When pruning a larger neural network during training, it is easier to obtain a low a bitwidth accumulator while maintaining better final accuracy. Thus, pruning is more robust than training a similar smaller network.

## Quantization-aware training (QAT)

While pruning helps maintain the post-quantization level of accuracy in low-precision settings, it does not help maintain accuracy when quantizing from floating point models. The best way to guarantee accuracy is to use quantization-aware training (read more in the quantization documentation).

In this example, QAT is done using Brevitas, changing `Linear`

layers to `QuantLinear`

and adding quantizers on the inputs of linear layers using `QuantIdentity.`

The quantization-aware training (QAT) import tool in Concrete-ML is a work in progress. While it has been tested with some networks built with Brevitas, it is possible to use other tools to obtain QAT networks.

Training this network with 30 non-zero neurons out of 100 total gives good accuracy while being FHE compatible (accumulator size < 8 bits).

non-zero neurons | 30 |
---|---|

3bit accuracy brevitas | 94.4% |

3bit accuracy in Concrete-ML | 91.8% |

accumulator size | 7 |

The torch QAT training loop is the same as the standard floating point training loop, but hyperparameters such as learning rate might need to be adjusted.

Quantization Aware Training is somewhat slower thant normal training. QAT introduces quantization during both the forward and backward passes. The quantization process is inefficient on GPUs as its computational intensity is low with respect to data transfer time.

## Additional examples

The following table summarizes the examples in this section.

Model | Dataset | Metric | Clear | Quantized | FHE |
---|---|---|---|---|---|

Fully Connected NN | accuracy | 0.947 | 0.895 | 0.895 | |

QAT Fully Connected NN | Synthetic (Checkerboard) | accuracy | 0.94 | 0.94 | 0.94 |

Convolutional NN | accuracy | 0.90 | ** | ** |

In this table, ** means that the accuracy is actually random-like, because the quantization we need to set to fullfil bitwidth constraints is too strong.

### Examples

Last updated